The Ford Barn - View Single Post

redmodelt · 02-09-2020, 01:06 PM

I put mine on so any part that slides into or onto you don't have to fight the taper in the seal so the open side is to the grease not away. When grease is added, you want the lip to be pushed to seal, not pushed to open and allow the grease past.

02-09-2020, 01:06 PM	#8
redmodelt Senior Member Join Date: May 2010 Location: Portland OR Posts: 6,354	Re: Hub seal orientation I put mine on so any part that slides into or onto you don't have to fight the taper in the seal so the open side is to the grease not away. When grease is added, you want the lip to be pushed to seal, not pushed to open and allow the grease past. __________________ I know the voices aren't real but damn they have some good ideas!