[FlatheadTed]

Hi Kpar,I saw the post but fished around in my stash for a Model backing plate for a hr and gave up .I have since found one .The rivets are shorter on the A as the backing plate protrudes out at that point were the v8 is lower ,the track is 1/8 on the A and 1/4 on the 8 the shoes are the same except one 11" and one 12 " ,the cam stop is different but stop in the same place (Top ) its nowhere near a bolt in deal ,you could maybe make it work by packing it up by 1/8 and widening the track ,But you could work on your own ones on the car as Koats suggests , the bushes are available I have some here ,Ted