Quote:
Originally Posted by Ol' Ron
I don't think you understand the question. How much does it coust to rebuild the engine. Take it to a machineshop and have it rebuilt "STOCK"
|
Boy Ron, I believe that is going to be all over the place. There is a lot of difference from one shop to another and think it is going to depend on what needs to be done. I'm not even sure one persons definition of stock is the same as another's. You posted the crank is turned, that would at least need to be checked. Are the bearing there and the correct size, etc. You are a builder, you know the ropes as well as anyone does!