The Ford Barn - View Single Post

30 Closed Cab PU · 07-04-2019, 11:42 AM

Measure voltage at battery terminals. Then measure from +12v battery post to the frame. Should be 12 v, if not bad cable, loose battery cable connection, or terminal on cable , and the connections on frame for the cable need to be cleaned.

Then measure from - battery post to starter cable connection, should measure 12v, if not same as above - bad cable, loose connection, connections need cleaning.

Do you have a Master cutoff switch - perhaps bad switch, bad connections.

07-04-2019, 11:42 AM	#2
30 Closed Cab PU Senior Member Join Date: Aug 2018 Posts: 2,332	Re: Model A starter clunk then no electrical Measure voltage at battery terminals. Then measure from +12v battery post to the frame. Should be 12 v, if not bad cable, loose battery cable connection, or terminal on cable , and the connections on frame for the cable need to be cleaned. Then measure from - battery post to starter cable connection, should measure 12v, if not same as above - bad cable, loose connection, connections need cleaning. Do you have a Master cutoff switch - perhaps bad switch, bad connections.