[BillCNC]

I agree, there should be another hanger but you can bend the pipe at the 90° bend to get it aligned correctly.

Over the year's the muffler weight sag's the hot manifold causing it close up the 90° bend making alignment a real pain. It doesn't take much to re-bend it to the proper alignment angle. Just put in a chain link fence post or something equivalent. You can also tape a rag on the end of the pipe so you wont get pressure dings in the muffler pipe from the end of the chain link post. It took me like 2 minutes and it was in perfect alignment.

Regards
Bill