The Ford Barn - View Single Post - 56 T-bird rebuild

Yotehunter66 · 04-15-2019, 11:40 AM

Replaced the pertronix with a set of points and a condenser and it fired right up. It runs pretty rough, I think, so I rechecked my wiring and the plugs are correct. All seem to be firing but when I pull #3, 4, 7 & 8 the engine idle does not change like no fuel to the back cylinders. Pulling #1,2,5 & 6 there is a noticable change in rpms. Any thoughts?

04-15-2019, 11:40 AM	#14
Yotehunter66 Member Join Date: Sep 2018 Location: Clayton, Michigan Posts: 48	Re: 56 T-bird rebuild Replaced the pertronix with a set of points and a condenser and it fired right up. It runs pretty rough, I think, so I rechecked my wiring and the plugs are correct. All seem to be firing but when I pull #3, 4, 7 & 8 the engine idle does not change like no fuel to the back cylinders. Pulling #1,2,5 & 6 there is a noticable change in rpms. Any thoughts?