The Ford Barn - View Single Post

Patrick L. · 04-13-2019, 05:37 AM

You say there is voltage to the points, is there spark at the sparklers ? That should be checked.

Don't use any more ether !

Add some oil to the cylinders and spin the motor a bit, install the sparklers before trying to start it again.

04-13-2019, 05:37 AM	#7
Patrick L. Senior Member Join Date: May 2010 Location: Largo Florida Posts: 7,225	Re: Help she no go.... You say there is voltage to the points, is there spark at the sparklers ? That should be checked. Don't use any more ether ! Add some oil to the cylinders and spin the motor a bit, install the sparklers before trying to start it again.