The Ford Barn - View Single Post - 1956 Victoria rear end gasket replacement

Daves55Sedan · 04-09-2019, 09:28 PM

Good grief! You will not pull anything unless you first remove rear wheels, brake drums and pull out the axle-shafts on both sides. Don't need to pull them all the way out, but enough to disengage the splined ends with the pumpkin.
Hate to see ya tryin to jerk that pumpkin out while the axle shafts are still in. Ain't gonna happen.

04-09-2019, 09:28 PM	#2
Daves55Sedan Senior Member Join Date: May 2010 Location: Granite City, Illinois Posts: 3,008	Re: 1956 Victoria rear end gasket replacement Good grief! You will not pull anything unless you first remove rear wheels, brake drums and pull out the axle-shafts on both sides. Don't need to pull them all the way out, but enough to disengage the splined ends with the pumpkin. Hate to see ya tryin to jerk that pumpkin out while the axle shafts are still in. Ain't gonna happen.