The Ford Barn - View Single Post

Fordors · 03-31-2019, 08:12 PM

John, what is the need for a spacer? Might not be what you are after but some will make one from phenolic or even plywood as an insulator to prevent fuel percolation. Phenolic is rigid, plywood less so, if you use that be careful tightening the carb down. I would think commercially available spacers are made for more common carburetors.

03-31-2019, 08:12 PM	#5
Fordors Senior Member Join Date: May 2010 Location: Orland Park,IL Posts: 1,408	Re: Need a source~~~~~!! John, what is the need for a spacer? Might not be what you are after but some will make one from phenolic or even plywood as an insulator to prevent fuel percolation. Phenolic is rigid, plywood less so, if you use that be careful tightening the carb down. I would think commercially available spacers are made for more common carburetors. __________________ My school colors are black and blue, I attended the School of Hard Knocks where I received a Masters Degree in Chronic Mopery.