The Ford Barn - View Single Post

JSeery · 03-25-2019, 07:08 AM

After you get it taken apart, first thing is to check the block for damage, such as cracks. If it appears ok visually, the next set is to have it pressure tested. Flatheads often have hidden cracks and you want to spend the least amount of money possible until you verify you have a good base to work with. Welcome to the Barn and the world of flathead Fords!

Disassembly can sometimes be a challenge if you are not familiar with the engine, so ask away if you have questions.

03-25-2019, 07:08 AM	#2
JSeery Member Emeritus Join Date: Nov 2012 Location: Wichita KS Posts: 16,132	Re: First Flathead Build After you get it taken apart, first thing is to check the block for damage, such as cracks. If it appears ok visually, the next set is to have it pressure tested. Flatheads often have hidden cracks and you want to spend the least amount of money possible until you verify you have a good base to work with. Welcome to the Barn and the world of flathead Fords! Disassembly can sometimes be a challenge if you are not familiar with the engine, so ask away if you have questions.