The Ford Barn - View Single Post

wrndln · 03-07-2011, 11:19 PM

I think the mains on the crank were originally 1.625 (slightly less for the oil lubrication). If your crank measures 1.5775, you crank is more than .045 under sized which is less than should be used. Are you sure the 1.5775 is correct?

03-07-2011, 11:19 PM	#3
wrndln Senior Member Join Date: May 2010 Location: Lakeville, MN Posts: 5,175	Re: Two questions I think the mains on the crank were originally 1.625 (slightly less for the oil lubrication). If your crank measures 1.5775, you crank is more than .045 under sized which is less than should be used. Are you sure the 1.5775 is correct?