The Ford Barn - View Single Post

BRENT in 10-uh-C · 02-28-2011, 10:21 AM

What are your capabilities? My experiences are that these repro parts actually work well if you know how to fit them, and use a pin-fitting hone to size the sector bushings. If you convert to a 2-tooth, you gain a little more leverage through the ratio change but it is kinda negligible IMHO.

.

02-28-2011, 10:21 AM	#2
BRENT in 10-uh-C Senior Member Join Date: May 2010 Location: Eastern Tennessee Posts: 12,245	Re: 7 Tooth Steering What are your capabilities? My experiences are that these repro parts actually work well if you know how to fit them, and use a pin-fitting hone to size the sector bushings. If you convert to a 2-tooth, you gain a little more leverage through the ratio change but it is kinda negligible IMHO. . __________________ . BRENT in 10-uh-C . www.model-a-ford.com ...(...Finally Updated!! ) .