The Ford Barn - View Single Post

MickeyT · 10-06-2018, 05:32 AM

It was missing on my '31 CCPU. Just remove the door panel, slip the lock into place and install the two screws. Pretty simple installation. Then you'll need to cut a hole in the door panel and put on the escutcheon and knob. The idea was the driver should not get out of the traffic side so he would lock the drivers door slide across the seat and get out on the passages side. Then lock the passages door from the outside door handle.

10-06-2018, 05:32 AM	#7
MickeyT Senior Member Join Date: Jul 2017 Location: Texas Posts: 195	Re: Driver side door lock It was missing on my '31 CCPU. Just remove the door panel, slip the lock into place and install the two screws. Pretty simple installation. Then you'll need to cut a hole in the door panel and put on the escutcheon and knob. The idea was the driver should not get out of the traffic side so he would lock the drivers door slide across the seat and get out on the passages side. Then lock the passages door from the outside door handle.