The Ford Barn - View Single Post

JDakota · 05-27-2010, 10:30 PM

I just replaced mine, the old bracket (top piece) stays put but leave about 1/8 " clearance all around it so there is no contact. I had to shim the new bracket with washers to get the correct clearance. There is a Ford Barn post that shows photos of a shim they used. It may help to loosen the steering sector on the frame and then tighten the top bracket and then tighten the bottom end last.

05-27-2010, 10:30 PM	#2
JDakota Member Join Date: May 2010 Location: Devils Lake ND Posts: 45	Re: 1930 Steering column support change I just replaced mine, the old bracket (top piece) stays put but leave about 1/8 " clearance all around it so there is no contact. I had to shim the new bracket with washers to get the correct clearance. There is a Ford Barn post that shows photos of a shim they used. It may help to loosen the steering sector on the frame and then tighten the top bracket and then tighten the bottom end last.