The Ford Barn - View Single Post

john charlton · 09-01-2018, 07:56 AM

Dave is right if the flat topped clevis pins are assembled with the split pin outward the innermost pin can rub on the hub .The other pins will not foul but I expect they were assembled on the line before the innermost pin was fitted .If there is any wear on the axle taper and hub it will rub for sure .

John in lovely sunny day first day of autumn Suffolk County England.

09-01-2018, 07:56 AM	#4
john charlton Senior Member Join Date: May 2010 Posts: 1,304	Re: Rear brake split pin discipline Dave is right if the flat topped clevis pins are assembled with the split pin outward the innermost pin can rub on the hub .The other pins will not foul but I expect they were assembled on the line before the innermost pin was fitted .If there is any wear on the axle taper and hub it will rub for sure . John in lovely sunny day first day of autumn Suffolk County England.