[JM 35 Sedan]

One of the nicest engine stands that I saw posted here and possibly on the HAMB, was built by Mike Bishop in CA. It had adapters that mounted to the front and back of the block and the block could be rotated 360* while doing relieving, porting or other work. I believe he also had adapters that bolted to both side of the block at the exhaust ports. The block could also be rotated 360* in that position. It had a motor cycle seat to sit on while working on the block. It was very well made. Wish I had saved some of his posted pictures. I tried to contact him about this but he did not answer my PM or Email messages.