Thread: Evaporust question...
View Single Post
Old 08-22-2018, 09:35 PM   #8
cas3
Senior Member
 
Join Date: Jan 2011
Location: Beverly Kansas
Posts: 5,558
Default Re: Evaporust question...
the last one i did was with heads off, dry the inside and scrape with a long screw driver, then with a piece of 3/8 copper tubing taped on to the end of the shop vac heres what i got from one side
Attached Images
File Type: jpg IMG_1182.jpg (68.6 KB, 108 views)
cas3 is offline   Reply With Quote