The Ford Barn - View Single Post

RKS.PA · 05-14-2018, 09:48 AM

Seth, the heat shield material I used for the line from pump to carb is made my DEI and I got it at our local Auto Zone. It's the right diameter and comes with the heat shrink tips to keep it in place. I haven't fully tested it yet, but at least when I touch the line (inside the shield) it's not hot....so here's hoping!!

Dick.

P.S. Chap, I think your wife's clothes pin theory is spot on!!!

05-14-2018, 09:48 AM	#20
RKS.PA Senior Member Join Date: Jun 2010 Location: Marana, AZ Posts: 1,197	Re: Fuel boiling at fuel pump Seth, the heat shield material I used for the line from pump to carb is made my DEI and I got it at our local Auto Zone. It's the right diameter and comes with the heat shrink tips to keep it in place. I haven't fully tested it yet, but at least when I touch the line (inside the shield) it's not hot....so here's hoping!! Dick. P.S. Chap, I think your wife's clothes pin theory is spot on!!!