The Ford Barn - View Single Post

Cecil/WV · 05-03-2018, 10:41 AM

I have never failed to get them off with a big hammer. Might need to put the sway bar in a vice to get a solid hit on it, after removing the end attached to the axle.

A little heat can do a world of good also.

05-03-2018, 10:41 AM	#3
Cecil/WV Senior Member Join Date: May 2010 Location: Gerrardstown, WV Posts: 2,303	Re: Tool advice I have never failed to get them off with a big hammer. Might need to put the sway bar in a vice to get a solid hit on it, after removing the end attached to the axle. A little heat can do a world of good also.