Quote:
Originally Posted by dln1949
I just picked up a rear fender for my 29 sedan, an AR 28, seems to be shaped different at the rear of the fender. My other fenders are more shovel shaped and this one seems to be more round. Is there differences between the AR front fenders and later 28/29 fenders also?
|
FYI - The front fender part ids were changed to A-16005-AR and A-16006-AR as of the first 1930 Ford parts list. Prior to that the front fender part ids were A-16005 and A16006.
Your are most likely wanting to know what the different designs were for 1927 through 1929 front fenders. The major change was the frame flange (design 1 had a 7" frame flange, design 2 had a 5-3/4" frame flange, and design 3 had a 3-1/8" frame flange).
Your can read/see the design differences at
http://aafords.com/aa-chassis/aa-16000-fenders/#fffsb. This site is for the AA Fords. But, the front fenders used on the AA's were A chassis fenders for 1927-1929.