The Ford Barn - View Single Post - TECH REQUEST: Removing Head Studs From The Block

Cecil-Indiana · 05-08-2010, 08:59 AM

I've had great success over the years with a Craftsman stud extractor. It works with a cam action up against the stud and hugs the block. I usually soak the studs a week before with PB Blaster. Good luck!

05-08-2010, 08:59 AM	#11
Cecil-Indiana Member Join Date: May 2010 Location: Muncie, IN Posts: 72	Re: TECH REQUEST: Removing Head Studs From The Block I've had great success over the years with a Craftsman stud extractor. It works with a cam action up against the stud and hugs the block. I usually soak the studs a week before with PB Blaster. Good luck!