View Single Post
Old 02-14-2018, 12:35 PM   #3
blucar
Senior Member
 
blucar's Avatar
 
Join Date: Jul 2010
Location: Ventura, CA
Posts: 2,466
Default Re: 1937 Ford Pickup Grill Shell

It has been many years since I restored a '37 pickup, like 1964-65, still have some of the left over parts.
The grille shell attaches to the front fenders at the very bottom, three bolts on each side as I recall. I recall a tab on the side of the radiator, at about the mid point that attached to the radiator support and two screws at the top that attached to the radiator.. Two quarter inch rods then attached to the top of the radiator, extending to the firewall. The grille shell attachment on the '37 is similar to the '35-36, however it is different because the shell is more massive with the grille being a part of the shell.
I still have a very nice '37 radiator, rear window molding and I believe I have some instruments.
__________________
Bill.... 36 5 win cpe
blucar is offline   Reply With Quote