The Ford Barn - View Single Post

midgetracer · 01-26-2018, 12:51 PM

I have an old V-8 spring spreader made by OTC. It is for the spring behind the axle type of setup. Half of it is just like the traveling spring spreader. I have used it for a Model A, but it was dangerous and wanted to jump up as it was tightened. If it came off the differential bolt, it could be lethal. I recommend a two sided one. You only live once.

01-26-2018, 12:51 PM	#5
midgetracer Senior Member Join Date: May 2010 Location: Bismarck ND Posts: 1,295	Re: Rear spring spreader from Snyders I have an old V-8 spring spreader made by OTC. It is for the spring behind the axle type of setup. Half of it is just like the traveling spring spreader. I have used it for a Model A, but it was dangerous and wanted to jump up as it was tightened. If it came off the differential bolt, it could be lethal. I recommend a two sided one. You only live once.