Re: Adjusting Flathead V8 Lifters
Should be a right and a left hand wrench. The tangs go into two of the 4 top holes to keep it from turning. If you are lucky, someone drilled a hole about 1/8" dia near the bottom of lifter boss in block. Poke an allen wrench into a diagonal slot in the lifter to stop it from turning. Way easier if you are so lucky.
__________________
Owner/Operator of 'Jailbar Ranch' on the side of Mt. Pickett. Current stable consists of 1946 1/2 ton pickup turned woodie wagon with FH V8, 1946 Tonner Pickup with 226 H six, 1979 Toyota landcruiser wagon, now wearing 1947 Ford Jailbar sheet metal. 'Rusty ol' floorboards, hot on their feet' (Alan Jackson)
|