Quote:
Originally Posted by flathead 53
My 53 f-100 was leaning approx 3/4 inch on driver side, installed brand new front springs ,still have a 3/4 lower on driver side . any ideas on this?
thanks
|
Usually, springs are replaced in pairs (R & L).
Also, if you look at a spring chart, the LF usually has a higher rating than the RF (to compensate for driver weight). If the RF was an original spring and the replacement LF was a repro without the correct rating, the vehicle can have incorrect trim height (considering frame straightness).
__________________
*****
"Last Sunday, I caught him makin' eyes at Idell Bushey durin' preachin'. And I know what they do up there in the hills when they say they're possum huntin'. They're just sittin' around the campfire, drinkin' hard cider, hittin' each other on the shoulder and hollerin' 'flinch!'."
― Charlene Darling (Daughter of Briscoe Darling)