Re: 39 Tube Shock Conversion
In post #3 by Flathead Fever, he posted instructions for installation of the tube shock conversion as well as parts and part numbers.
Picture 4 shows a tapered sleeve (10904) for mounting a bolt to the original tapered shock link mount.
Picture 6 shows a tapered bolt (A-14455) that mounts the shock to the original tapered shock link mount. Apparently, either one can be used.
Are either of these two parts available anywhere? I have the conversion mounts to change to tube shocks but I don't have the tapered sleeve or the tapered bolt.
It was mentioned in a previous thread that some one was making the tapered bolt but apparently he doesn't answer the phone.
Ken
|