The Ford Barn - View Single Post

Lawrie · 11-20-2017, 11:14 PM

Kiwitony
Read my post the other day regarding the mounts.
I used the bob drake supplied ones on the 33 ,they fitted great and have Ford and the part number cast into the rubber donut,
We are away in the 33 at the moment and it’s WAY smoother ,the motor is realy nice and quieter read less harsh with them fitted.the ones I took out were on the 33 from NZ and I wouldn,t know how old, but they were as hard as a rock.
Lawrie

11-20-2017, 11:14 PM	#15
Lawrie Senior Member Join Date: May 2010 Location: Qld, Australia Posts: 4,232	Re: Early ford engine mount donuts Kiwitony Read my post the other day regarding the mounts. I used the bob drake supplied ones on the 33 ,they fitted great and have Ford and the part number cast into the rubber donut, We are away in the 33 at the moment and it’s WAY smoother ,the motor is realy nice and quieter read less harsh with them fitted.the ones I took out were on the 33 from NZ and I wouldn,t know how old, but they were as hard as a rock. Lawrie