The Ford Barn - View Single Post

BillLee/Chandler, TX · 11-16-2017, 01:00 PM

I did the same sort of thing earlier this year.

Made a little dam with modeling clay around each stuck stud and filled with PBBlaster. Renewed as needed. Then double-nutting and they all came out.

11-16-2017, 01:00 PM	#10
BillLee/Chandler, TX Senior Member Join Date: May 2010 Location: The sticks of east Texas Posts: 474	Re: getting out stuck head studs I did the same sort of thing earlier this year. Made a little dam with modeling clay around each stuck stud and filled with PBBlaster. Renewed as needed. Then double-nutting and they all came out. __________________ Bill Lee http://www.CedarCreekAs.org