Quote:
Originally Posted by Bondolero
The plastic portion of my bushing is gone but the metal outer needs to be removed. Is there any way to accomplish this without pulling the entire column mast ? Thinking maybe filling a cut in it and getting it to collapse a little ?
thanks
|
Your post is a little confusing. If you had the plastic insert then you most likely have the later Ford bearing in your column. See if the center part of the metal ring will spin. If it does then you have the later bearing. If the bearing is still good then all you need to buy is the new tapered plastic insert. You can buy them on e-Bay or from C and G Parts.