The Ford Barn - View Single Post

Jim/GA · 10-28-2017, 11:25 PM

You are doing nothing wrong. 2 or 3 turns are enough.

It is not a pipe connection with pressurized fluid that is going to leak out. In fact, if you screw it in too far, you will short it out inside and you will get no spark.

10-28-2017, 11:25 PM	#2
Jim/GA Senior Member Join Date: May 2010 Location: Young Harris, GA Posts: 1,831	Re: Problem screwing Distributor wire You are doing nothing wrong. 2 or 3 turns are enough. It is not a pipe connection with pressurized fluid that is going to leak out. In fact, if you screw it in too far, you will short it out inside and you will get no spark. __________________ Jim Cannon Former MAFCA Technical Director "Have a Model A day!"