The Ford Barn - View Single Post

JWL · 10-19-2017, 06:06 AM

The typical use for the .0825 pistons was in sleeved blocks when the sleeves were removed. Both the 3 1/16 and the 3 3/16 bore engines had the .0825 oversize available.

Better do some wall thickness investigating, however, several 3 1/16 engines have been taken to 3 3/16.

10-19-2017, 06:06 AM	#3
JWL Member Emeritus Join Date: May 2010 Location: Fitzgerald, Georgia Posts: 2,204	Re: Piston Rings The typical use for the .0825 pistons was in sleeved blocks when the sleeves were removed. Both the 3 1/16 and the 3 3/16 bore engines had the .0825 oversize available. Better do some wall thickness investigating, however, several 3 1/16 engines have been taken to 3 3/16.