The Ford Barn - View Single Post

Gary Tosel · 08-26-2017, 01:59 PM

The switch has a guide, so it goes in only one way. Remove the switch, C clip, two prong guide and spring. Hold the switch plate and pull the horn rod out and turn 90 degrees. Reinstall spring, two prong guide and C clip. You do not need to drop the column to make this change.

08-26-2017, 01:59 PM	#2
Gary Tosel Senior Member Join Date: May 2010 Location: Minnesota Posts: 1,422	Re: Horn button orientation The switch has a guide, so it goes in only one way. Remove the switch, C clip, two prong guide and spring. Hold the switch plate and pull the horn rod out and turn 90 degrees. Reinstall spring, two prong guide and C clip. You do not need to drop the column to make this change.