Thread
:
Removing 1940 drums
View Single Post
07-27-2017, 01:31 PM
#
15
grumppyoldman
Senior Member
Join Date: Apr 2017
Location: Texas Gulf Coast
Posts: 727
Re: Removing 1940 drums
Andy's right do not hammer on the end of the axle or a puller attached to the axle, you are hammering on the timken bearings in the rear end, and on the penion gear if on driver's side. Bad idea. Al
grumppyoldman
View Public Profile
Send a private message to grumppyoldman
Find More Posts by grumppyoldman