The Ford Barn - View Single Post

Terry,OH · 07-19-2017, 06:11 PM

Remove the old pins from the original holes. You should be left with a partial 3/4" hole. Fill the holes left by the PO with Devcon plastic steel. Let it harden properly. Take a 3/4" hand reamer and ream the original hole to proper size and install new shackles.

07-19-2017, 06:11 PM	#4
Terry,OH Senior Member Join Date: May 2010 Posts: 5,395	Re: Rear axle/wishbone destroyed Remove the old pins from the original holes. You should be left with a partial 3/4" hole. Fill the holes left by the PO with Devcon plastic steel. Let it harden properly. Take a 3/4" hand reamer and ream the original hole to proper size and install new shackles.