The Ford Barn - View Single Post

D. Jones · 05-21-2017, 08:49 PM

Made mine from 20" of 2" ABS black plastic pipe and two caps. The tube to the bottom is made from an aluminum arrow shaft and the overflow is a 90 degree brass elbow and hose barb threaded in to the top cap. Black rubber tubing to hook it together. I made the hanger straps from 3/4 x 1/16" flat strap and fastened it to the drivers side radiator shroud bolts.

You have to look right at it to see it as the motor compartment is black.

05-21-2017, 08:49 PM	#9
D. Jones Senior Member Join Date: Jan 2013 Location: Bend, Oregon Posts: 519	Re: Coolant recovery tank????? Made mine from 20" of 2" ABS black plastic pipe and two caps. The tube to the bottom is made from an aluminum arrow shaft and the overflow is a 90 degree brass elbow and hose barb threaded in to the top cap. Black rubber tubing to hook it together. I made the hanger straps from 3/4 x 1/16" flat strap and fastened it to the drivers side radiator shroud bolts. You have to look right at it to see it as the motor compartment is black.