The Ford Barn - View Single Post - Question about por-15 putty or filler

mikhett · 04-25-2017, 03:47 PM

METAL to METAL and any "METAL' based fillers are JUNK!I bought a 56 ford that was taken down to bare metal and the P.O. used it.Wereever he used it it cracked .Fine hairline cracks all over.Si I went down to bare metal and ground it all out(ir wasn't thick thank god!) and It only had 3 coats of primer so the do over wasn't to bad.

04-25-2017, 03:47 PM	#3
mikhett Senior Member Join Date: May 2010 Location: Jackson N.J Posts: 206	Re: Question about por-15 putty or filler METAL to METAL and any "METAL' based fillers are JUNK!I bought a 56 ford that was taken down to bare metal and the P.O. used it.Wereever he used it it cracked .Fine hairline cracks all over.Si I went down to bare metal and ground it all out(ir wasn't thick thank god!) and It only had 3 coats of primer so the do over wasn't to bad.