The Ford Barn - View Single Post

19Fordy · 04-03-2017, 10:48 AM

My 1935-48 MOTOR'S AUTO REPAIR MANUAL shows on page 503 that the king pin dia. for ALL 1941 Lincoln models is .937 in.
Caster Angle is +3 to 5 degrees
Camber Setting is +1/4 to 3/4 degrees
Toe in is 1/16 in.
Toe-out on Turns is 23 degrees
Kingpin Inclination is 3 3/4 to 4 3/4 degrees
Kingpin Dia. .937 in.

04-03-2017, 10:48 AM	#2
19Fordy Senior Member Join Date: May 2010 Location: Coral Springs FL Posts: 11,916	Re: lincoln king pin size My 1935-48 MOTOR'S AUTO REPAIR MANUAL shows on page 503 that the king pin dia. for ALL 1941 Lincoln models is .937 in. Caster Angle is +3 to 5 degrees Camber Setting is +1/4 to 3/4 degrees Toe in is 1/16 in. Toe-out on Turns is 23 degrees Kingpin Inclination is 3 3/4 to 4 3/4 degrees Kingpin Dia. .937 in.