The Ford Barn - View Single Post

Flatout · 04-02-2017, 08:36 PM

A small amount of grinding on the rear of the straight spring will allow it to slip right into the crossmember. Even less is needed to fit into a 32 crossmember.
I've done this several times over the years.

04-02-2017, 08:36 PM	#7
Flatout Senior Member Join Date: May 2010 Location: Damascus Oregon Posts: 160	Re: Fitting A 40 diff into a 34 chassis A small amount of grinding on the rear of the straight spring will allow it to slip right into the crossmember. Even less is needed to fit into a 32 crossmember. I've done this several times over the years.