The Ford Barn - View Single Post

J Witt · 03-14-2017, 07:46 PM

Be careful. Not only does the pot metal casting have a low melting point, it is somewhat fragile and can be broken easily if gripped in a vise or such. Also, these are getting to be somewhat pricey.

I recall seeing different fuel pump stands (without a pump flange) in several vendors catalogs. Maybe Speedway, or someone may have a better suggestion.

John

03-14-2017, 07:46 PM	#3
J Witt Senior Member Join Date: Mar 2015 Location: Acworth GA Posts: 534	Re: 59AB Fuel Pump stand ? Be careful. Not only does the pot metal casting have a low melting point, it is somewhat fragile and can be broken easily if gripped in a vise or such. Also, these are getting to be somewhat pricey. I recall seeing different fuel pump stands (without a pump flange) in several vendors catalogs. Maybe Speedway, or someone may have a better suggestion. John __________________ Houston, Tranquility base here. The Eagle has landed.