Spent some time getting the truck running a little better. Pretty pleased with the progress so far. The gas is old, which isn't helping but at least it is starting well. The choke cable was all bent up and sticky, straighten and lubed it up and is working pretty good now. The throttle return spring was anchored to the rubber hose running to vacuum line on the distributor! Where is the throttle return spring supposed to go? Anyway, I put together a bit of a walk-a-round video. I should have a new master cylinder tomorrow... might get a drive around the block!
https://www.youtube.com/watch?v=X4v7...ature=youtu.be