The Ford Barn - View Single Post

Ol' Ron · 03-12-2017, 05:18 PM

Well if the block is flat and so are the heads, go for it. However, don't over torque, as the block had a soft deck and can distort. 45/50 lbs max.

03-12-2017, 05:18 PM	#7
Ol' Ron Senior Member Join Date: May 2010 Location: Chester Vt Posts: 8,985	Re: Gasket making inquiry... Well if the block is flat and so are the heads, go for it. However, don't over torque, as the block had a soft deck and can distort. 45/50 lbs max.