The Ford Barn - View Single Post - 48-50 F3 Widowmaker Replacement

jboren · 03-06-2017, 03:12 PM

I'n not sure exactly what you are asking. The adapter is bolted down to the drum via the original studs with the new 1/2-20 bulge lugs. It looks somewhat like they are barely holding but the bulge lugs are fairly deep and there is lots of threads holding. They are torqued down properly. I am using the same 1/2-20 bulge lugs on the front wheels.

jb

03-06-2017, 03:12 PM	#3
jboren Junior Member Join Date: May 2010 Posts: 16	Re: 48-50 F3 Widowmaker Replacement I'n not sure exactly what you are asking. The adapter is bolted down to the drum via the original studs with the new 1/2-20 bulge lugs. It looks somewhat like they are barely holding but the bulge lugs are fairly deep and there is lots of threads holding. They are torqued down properly. I am using the same 1/2-20 bulge lugs on the front wheels. jb