Thread: First Flathead
View Single Post
Old 12-23-2016, 12:58 PM   #3
cmbrucew
Senior Member
 
cmbrucew's Avatar
 
Join Date: Dec 2010
Location: North of sandy ago, CA.
Posts: 2,080
Default Re: First Flathead

JJK
Make a 50/50 mixture of Marvel Mystery Oil and acetone.
Put a tub under the block and soak rods, mains, and pistons. after a couple of days turn the block upright and soak the pistons from the top. You did not indicate if you had removed the heads, or valves.
Bruce
__________________
Works good
Lasts long time
cmbrucew is offline   Reply With Quote