Quote:
Originally Posted by Vic in E-TN
I started this thread a long time ago. If I was going to make 2 more adjustable drag links, what is the drag link diameter and thread size? I would be using one of the tie rod ends on the drag link- with the normal hand thread to make it easier to find a die for the cut off part of the drag link. It might be easier to just buy one or two.
Vic
|
Vic,
The 2 adjustable drag link diameters I have are, 9/16x18tpi and 5/8x18tpi, you will need a drag link of 11/16 diameter (if there is one ) to use a tie rod end, you will need a left and right to be able to adjust full lock and align the steering wheel, if you go with the drag links use the 5/8 diameter, you will only need the 1 pair of dyes.