The Ford Barn - View Single Post - 1932 Roadster

glennpm · 12-13-2016, 07:22 PM

Good thanks Rich.

First step will be to remove the small hump to the right in my pictures, the one toward the car interior. I'm then going to try to grind and sand both the top and bottom humps closest to the seal tee leg to attempt a uniform thickness of 7/32" or .201.

12-13-2016, 07:22 PM	#30
glennpm Senior Member Join Date: Sep 2014 Location: Mid-Coast Maine Posts: 3,346	Re: 1932 Roadster - Rear Hood Hinge Bracket? Good thanks Rich. First step will be to remove the small hump to the right in my pictures, the one toward the car interior. I'm then going to try to grind and sand both the top and bottom humps closest to the seal tee leg to attempt a uniform thickness of 7/32" or .201.