View Single Post
Old 11-10-2016, 09:38 AM   #7
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 18,018
Default Re: Need a part ID, name and hopefully a source please

Some of the old Ford parts manuals contain illustrations of different clips used in manufacture of the early V8s. Part number specific ones may be different though. Adel clamps come in all sorts of sizes and composition. Some are cushioned and some are not. AC Spruce carries some. http://www.aircraftspruce.com/search...+clamp&x=0&y=0

Roy may be a good starting place looking for an original type.
rotorwrench is offline   Reply With Quote