The Ford Barn - View Single Post

dodgeo · 10-26-2016, 07:17 PM

Charlie,
Thanks, but I have a 36 manifold which, as mentioned, has the mounting surface 1" lower than the 34. The 36 manifold has the same generator height mounting as the 34, by the way.
I want to use the 34 manifold as it has the same base design as the 32.
It sounds as if I need the 8.87" high push rod as called for iron manifolds ??
I have seen several 32 engines which use the 34 manifold, so there must be a simple solution.
Dodge Olmsted

10-26-2016, 07:17 PM	#4
dodgeo Junior Member Join Date: Sep 2014 Location: Cape Cod, Mass Posts: 27	Re: 34 manifold to stock 32 engine Charlie, Thanks, but I have a 36 manifold which, as mentioned, has the mounting surface 1" lower than the 34. The 36 manifold has the same generator height mounting as the 34, by the way. I want to use the 34 manifold as it has the same base design as the 32. It sounds as if I need the 8.87" high push rod as called for iron manifolds ?? I have seen several 32 engines which use the 34 manifold, so there must be a simple solution. Dodge Olmsted