The Ford Barn - View Single Post

Mitch//pa · 09-09-2016, 03:27 PM

Buy both new manifolds.. (It's not an arm and a leg) //old manifolds are distorted and they usually leak again soon..
You do not need to surface the new ones
Use copper gaskets, with new studs, nuts and concave washers... (Remember dome out)
Sealer not needed on anything
It will look slick when done ( I like the porcelain coated one)

09-09-2016, 03:27 PM	#8
Mitch//pa BANNED Join Date: May 2010 Location: Bucks County, PA Posts: 11,454	Re: exhaust manifold leak Buy both new manifolds.. (It's not an arm and a leg) //old manifolds are distorted and they usually leak again soon.. You do not need to surface the new ones Use copper gaskets, with new studs, nuts and concave washers... (Remember dome out) Sealer not needed on anything It will look slick when done ( I like the porcelain coated one) Last edited by Mitch//pa; 09-09-2016 at 03:35 PM.