The Ford Barn - View Single Post

Ole Don · 08-31-2016, 07:40 AM

I would use the washers. They will prevent the nut from tearing the rubber. A drop of oil on each end, and it will finger tighten almost to the point of a perfect seal, that's why only 1/2 to one full turn with a wrench.

08-31-2016, 07:40 AM	#7
Ole Don Senior Member Join Date: May 2010 Location: St. Michael, Minnesota Posts: 1,713	Re: Oil pan tube to oil pump seal I would use the washers. They will prevent the nut from tearing the rubber. A drop of oil on each end, and it will finger tighten almost to the point of a perfect seal, that's why only 1/2 to one full turn with a wrench.