The Ford Barn - View Single Post - resistor for 12v with original 1935 inline

BUBBAS IGNITION · 07-26-2016, 07:55 PM

Original resistor is .6 ohms.... Leave it as is and use a 1.5 ohm coil. Should be fine. Total 2.1 would be approx six amps, Mallory cuts out at 8 amps with current limiting .
Napa. IC 12 SB is ac1.5 ohm coil

07-26-2016, 07:55 PM	#4
BUBBAS IGNITION Senior Member Join Date: May 2010 Location: SPEEDWAY INDIANA Posts: 4,148	Re: resistor for 12v with original 1935 inline Original resistor is .6 ohms.... Leave it as is and use a 1.5 ohm coil. Should be fine. Total 2.1 would be approx six amps, Mallory cuts out at 8 amps with current limiting . Napa. IC 12 SB is ac1.5 ohm coil __________________ If it Makes Spark, we do it !!!! www.bubbasignition.com [email protected] Last edited by BUBBAS IGNITION; 07-26-2016 at 08:01 PM.